If your primary display is on the right side of a dual-screen setup, you can try either of these steps:
1. On the back side of the 10Zig, there are two cables that connect to the monitors. Unplug them both and reverse which ports they are plugged into. This will switch the positioning of your desktop on the displays. Once the displays come back up, the displays should be positioned correctly.
2. Otherwise, you can change the orientation through the 10Zig. On the 10Zig login screen, click on the Display setting icon on the login screen.
3. It will then open up the Display settings screen. Click on “Identify” and it will put a label up on each screen letting you know what the identifier for each screen is.
4. After seeing what each display identifies as, if you look at the area with the screens, you will notice it has the same identifiers that you just saw. Hold left-click on the display you would like to move, and drag it into the correct position.
5. Click Save and the screens will go black, then come back up. It will ask if you want to keep the settings, click “Yes”.